Laboratory Water Purification System,LabpureS-S30
Output(25℃):30liters/hourFlow rate:Up to 2 liters/minute(with pressure tank)
Pure water outlet:2:reverse osmosis water,ultrapure water
| Model | Standard | |
| LabpureS-S30 | ||
| Output(25°C)* | 30 liters/hour | |
| Flow rate | Up to 2 liters/minute(with pressure tank) | |
| Pure water outlet | 2: reverse osmosis water, ultrapure water | |
| Ultrapure water quality | Resistivity(25°C) | 18.2MΩ.cm |
| TOC* | <10ppb | |
| Bacteria | <0.1cfu/ml | |
| Particle(>0.1µm) | <1/ml | |
| Endotoxin | N/A | |
| RNases | N/A | |
| DNases | N/A | |
| RO water quality | Ion rejection rate | 97%-99% (new RO membrane) |
| Organic rejection rate | >99%, when MW>200 Dalton | |
| Particles and bacteria rejection rate | >99% | |
| Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |
| Dimension (L×W×H) | 410×220×420mm | |
| Weight | 18Kg | |
| Electrical requirements | AC100-240V, 50/60Hz | |
| Power | 72W | |
| Standard configuration | Main body (Including 1 set of cartridge)+15 liters pressure tank+ TDS/conductivity test pen | |
With injection molding process case, single stage RO system, 1 pump, portable TDS test pen and on-line resistivity monitor, Smart-S series ultrapure water system is sub-economic choice of ultrapure water for high grade experiments.
With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and ultrapure water. The single stage RO water’s ion rejection rate is more than 97%,and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
No PDF document available for this product at present
Leave a message
Please fill in information, we will get back to you within 24 hours.
![HZK-FA Series [0.1mg/0.01mg]](http://qiniu.digood-assets-fallback.work/457/image_1588234808_HZK-FA-Series-[0.1mg0.01mg]_-(6).jpg)
