Laboratory Water Purification System,LabpureS-Q30UT
Output(25℃):30liters/hourFlow rate:Up to 2 liters/minute(with pressure tank)
Pure water outlet:2:reverse osmosis water,deionized water
| Model | LabpureS-Q30UT | |
| Output(25°C)* | 30 liters/hour | |
| Flow rate | Up to 2 liters/minute(with pressure tank) | |
| Pure water outlet | 2: reverse osmosis water, deionized water | |
| Deionized water quality | Resistivity | 15-18.2MΩ.cm |
| Bacteria | <0.1cfu/ml | |
| Particle(>0.1µm) | <1/ml | |
| RO water quality | Ion rejection rate | 97%-99% (new RO membrane) |
| Organic rejection rate | >99%, when MW>200 Dalton | |
| Particles and bacteria rejection rate | >99% | |
| Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |
| Dimension (L×W×H) | 410×220×420mm | |
| Weight | 18Kg | |
| Electrical requirements | AC100-240V, 50/60Hz | |
| Power | 72W | |
| Standard configuration | Main body (Including 1 set of cartridge)+15 liters pressure tank+ TDS/conductivity test pen | |
With injection molding process case, single stage RO system, 1 pump, portable TDS test pen and on-line resistivity monitor, Smart-Q series deionized water system is sub-economic choice of deionized water for general grade experiments.
With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and deionized water. The single stage RO water’s ion rejection rate is more than 97%, and the deionized water’s resistivity is more than 15MΩ.cm, near to18.2MΩ.cm. It completely meets the requirements of general chemical or biological experiments for pure water.
No PDF document available for this product at present
Leave a message
Please fill in information, we will get back to you within 24 hours.
![HZK-FA Series [0.1mg/0.01mg]](http://qiniu.digood-assets-fallback.work/457/image_1588234808_HZK-FA-Series-[0.1mg0.01mg]_-(6).jpg)
