Laboratory Water Purification System,LabpureM Touch-S15UVF
Output(25℃):15liters/hourFlow rate:Up to 2 liters/minute(with pressure tank)
Pure water outlet:2:reverse osmosis water,ultrapure water
| Model | Synthesizing | |
| LabpureM Touch-S15UVF | ||
| Output(25°C)* | 15 liters/hour | |
| Flow rate | Up to 2 liters/minute(with pressure tank) | |
| Pure water outlet | 2: reverse osmosis water, ultrapure water | |
| Ultrapure water quality | Resistivity(25°C) | 18.2MΩ.cm |
| TOC* | <3ppb | |
| Bacteria | <0.1cfu/ml | |
| Particle(>0.1µm) | <1/ml | |
| Endotoxin | <0.001Eu/ml | |
| RNases | <1ng/ml | |
| DNases | <5pg/ml | |
| RO water quality | Ion rejection rate | 97%-99% (new RO membrane) |
| Organic rejection rate | >99%, when MW>200 Dalton | |
| Particles and bacteria rejection rate | >99% | |
| Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |
| Dimension (L×W×H) | 500×360×540mm | |
| Weight | 20Kg | |
| Electrical requirements | AC100-240V, 50/60Hz | |
| Power | 120W | |
| Standard configuration | Main body (Including 1 set of cartridge)+15 liters pressure tank | |
With 5.0 inch touch screen system, 3 way water quality sensors, 2 way flow sensor for quantified dispensing, single stage RO system and 2 pumps, Master Touch-S series ultrapure water system is superior choice of ultrapure water for high grade experiments.
With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and ultrapure water. The single stage RO water’s ion rejection rate is more than 97%, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP
No PDF document available for this product at present
Leave a message
Please fill in information, we will get back to you within 24 hours.
![HZK-FA Series [0.1mg/0.01mg]](http://qiniu.digood-assets-fallback.work/457/image_1588234808_HZK-FA-Series-[0.1mg0.01mg]_-(6).jpg)
