Laboratory Water Purification System,LabpureM Touch-Q30
Output(25℃):30liters/hourFlow rate:Up to 2 liters/minute(with pressure tank)
Pure water outlet:2:reverse osmosis water,deionized water
| Model | LabpureM Touch-Q30 | |
| Output(25°C)* | 30 liters/hour | |
| Flow rate | Up to 2 liters/minute(with pressure tank) | |
| Pure water outlet | 2: reverse osmosis water, deionized water | |
| Ultrapure water quality | Resistivity(25°C) | 16-18.2MΩ.cm |
| Bacteria | N/A | |
| Particle(>0.1µm) | N/A | |
| RO water quality | Ion rejection rate | 97%-99% (new RO membrane) |
| Organic rejection rate | >99%, when MW>200 Dalton | |
| Particles and bacteria rejection rate | >99% | |
| Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |
| Dimension (L×W×H) | 500x360x540mm | |
| Weight | 20Kg | |
| Electrical requirements | AC100-240V, 50/60Hz | |
| Power | 120W | |
| Standard configuration | Main body (Including 1 set of cartridge)+15 liters pressure tank | |
With 5.0 inch touch screen system, 3 way water quality sensors, 2 way flow sensor for quantified dispensing, single stage RO system and1 pump, Master Touch-Q series deionized water system is superior choice of deionized water for general grade experiments.
With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and deionized water. The single stage RO water’s ion rejection rate is more than 97%, and the deionized water’s resistivity is above16MΩ.cm, near to18.2MΩ.cm. It completely meets the requirements of general chemical or biological experiments for pure water
No PDF document available for this product at present
Leave a message
Please fill in information, we will get back to you within 24 hours.
![HZK-FA Series [0.1mg/0.01mg]](http://qiniu.digood-assets-fallback.work/457/image_1588234808_HZK-FA-Series-[0.1mg0.01mg]_-(6).jpg)
