Laboratory Water Purification System,LabpureM-D120UV
Flow rate:Up to 2 liters/minute(less output with UF cartridge)
Pure water outlet:2:deionized water,ultrapure water
| Model | Low TOC | |
| LabpureM-D120UV | ||
| Flow rate | Up to 2 liters/minute(less output with UF cartridge) | |
| Pure water outlet | 2: deionized water, ultrapure water | |
| Ultrapure water quality | Resistivity(25°C) | 18.2MΩ.cm |
| TOC* | <3ppb | |
| Bacteria | <0.1cfu/ml | |
| Particle(>0.1µm) | <1/ml | |
| Endotoxin | N/A | |
| RNases | N/A | |
| DNases | N/A | |
| Deionized water quality Resistivity(25℃) | >5MΩ.cm | |
| Feed water requirements |
RO water, distilled water, deionized water, 5-45°C,1atm*
|
|
| Dimension (L×W×H) | 500×360×540mm | |
| Weight | 18Kg | |
| Electrical requirements | AC100-240V, 50/60Hz | |
| Power | 120W | |
| Standard configuration | Main body (Including 1 set of cartridge) | |
With LCD controlling system, 3 way water quality sensors, timing and quality dispensing and 1 pump, Master-D series ultrapure water system is sub-superior choice of ultrapure water for high grade experiments.
With pure water or distilled water inlet, its output is up to 2 liters/minute. It can produce deionized water and ultrapure water. The deionized water´s resistivity is above 5MΩ.cm, and the ultrapure water´s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
No PDF document available for this product at present
Leave a message
Please fill in information, we will get back to you within 24 hours.
![HZK-FA Series [0.1mg/0.01mg]](http://qiniu.digood-assets-fallback.work/457/image_1588234808_HZK-FA-Series-[0.1mg0.01mg]_-(6).jpg)
