Your reliable Laboratory Instruments specialist

Your reliable Laboratory Instruments specialist

Laboratory Water Purification System,LabpureEdi-S10UVF

Output(25℃):10liters/hour
Pure water outlet:2:deionized water, ultrapure water

Model Synthesizing
LabpureEdi-S10UVF
Output 10 liters/hour
Pure water outlet 2: deionized water, ultrapure water
Ultrapure water quality Resistivity(25°C) 18.2MΩ.cm
TOC* <3ppb
Bacteria <0.1cfu/ml
Particle(>0.1µm) <1/ml
Endotoxin <0.001Eu/ml
RNases <1pg/ml
DNases <5pg/ml
Deionized water quality Resistivity >5MΩ.cm
TOC* <30ppb
Silicone rejection rate >99.9%
Feed water requirements Tap water,temperature:5-45°C,pressure:1.0-4.0Kgf/cm2
Dimension (L×W×H) 500×360×540mm
Weight 20Kg
Electrical requirements AC100-240V, 50/60Hz
Power 120W
Standard configuration Main body (Including 1 set of cartridge)
With LCD controlling system,3 way water quality sensor, timing and quality dispensing, single stage RO system,2 pump and Ionpure® EDI module, Edi-S ultrapure water system is superior choice of ultrapure water for high grade experiments.
With tap water inlet, the largest capacity is 240 liters per day. It can produce deionized water and ultrapure water.
The deionized water is stable grade II pure water with resistivity>5M Ω.cm(25°C),TOC<30ppb,and the lowest running cost. It completely meets the requirements of general chemical or biological experiments for pure water, and is up to the standard of ISO 3696(Type II),ASTM D1193 (Resistivity of type II and TOC),and the requirements for pure water of CLSI (NCCLS) clinical laboratory, GB/T6682,America,Europe,Japan´s pharmacopeia.
And the ultrapure water´s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM,CAP,CLSI,EP and USP.
No PDF document available for this product at present

Leave a message

Please fill in information, we will get back to you within 24 hours.

Related Products

Add: Rm.1101,Building 1,No.1428 Huanding Rd,Jianggan Dist.,Hangzhou 310021,China
Fax: +86-571-85383683