Model | Standard | |
LabpureEco-S30 | ||
Output(25°C)* | 30 liters/hour | |
Flow rate | Up to 2 liters/minute(with pressure tank) | |
Pure water outlet | 2: reverse osmosis water, ultrapure water | |
Ultrapure water quality | Resistivity(25°C) | 18.2MΩ.cm |
TOC* | <10ppb | |
Bacteria | <0.1cfu/ml | |
Particle(>0.1µm) | <1/ml | |
Endotoxin | N/A | |
RNases | N/A | |
DNases | N/A | |
RO water quality | Ion rejection rate | 97%-99% (new RO membrane) |
Organic rejection rate | >99%, when MW>200 Dalton | |
Particles and bacteria rejection rate | >99% | |
Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |
Dimension (L×W×H) | 340×500×560mm | |
Weight | 18Kg | |
Electrical requirements | AC100-240V, 50/60Hz | |
Power | 72W | |
Standard configuration | Main body (Including 1 set of cartridge)+build-in12 liters pressure tank |
With LCD controlling system, 2 way water quality sensors, timing and quality dispensing, single stage RO system, 1 pump, and built-in 12 liters tank, Eco-S series ultrapure water system is economic choice of ultrapure water for high grade experiments.
With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and ultrapure water. The single stage RO water’s ion rejection rate is more than 97%, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP
No PDF document available for this product at present
Leave a message
Please fill in information, we will get back to you within 24 hours.