Technical Data:
Model | DOF-A136 | |
Cycle Mode | Forced convection | |
Function | Temp. Range | RT+10-250°C |
Temp. Resolution Ratio | 0.1°C | |
Temp. Motion | ±1°C | |
Temp. Uniformity | ±2.5% | |
Structure | Inner Chamber | High strength galvanized sheet |
Outer Shell | Cold rolling steel electrostatic spraying exterior | |
Insulation layer | High quality rock wool board(with CE) | |
Heater | 101 model with Stainless steel electric heating tube; | |
Power rating | 2.3kW | |
Exhaust hole | φ28mm top(with function of test hole) | |
Controller | Temp. control mode | Two temperature section PID intelligent |
Temp. setting mode | Touch button setting | |
Temp. display mode | LED Digital display | |
Timer | 0-9999min(with timing wait function) | |
Operation function | Fixed temperature operation, timing function,auto stop. | |
Additional function | Sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power-off parameter memory | |
Sensor | PT100 | |
Safety device | Over temperature sound-light alarm | |
Specification | Inner Chamber size(W*L*H)(mm) | 550*450*550 |
Exterior size (W*L*H)(mm) | 852*572*786 | |
Packing size (W*L*H)(mm) | 955*715*935 | |
Volume | 136L | |
Shelf number | 17 | |
Load per rack | 15kg | |
Shelf space | 25mm | |
(50/60HZ)Current rating | AC220V/9.1A | |
NW/GW (kg) | 62/68 | |
Accessory | Shelf | 2 |
Shelf frame | 4 |
High precision and large density sample drying treatment;
Horizontal forced air type, high space utilization and good temperature unformity;
Forced fan cooling intake structure, the maximum working temperature <50°C, the long-term longevity operation;
New anti-hot handle
Horizontal forced air type, high space utilization and good temperature unformity;
Forced fan cooling intake structure, the maximum working temperature <50°C, the long-term longevity operation;
New anti-hot handle
No PDF document available for this product at present
Leave a message
Please fill in information, we will get back to you within 24 hours.