YAW-300.10S constant load cement flexural and compressive testing machine
YAW-300·10S Constant Load Cement Flexural and Compressive Testing Machine is an essential testing instrument for building materials,construction engineering, quality supervision, metrology testing, scientific researchinstitutions and other units.
The product complies with the specific provisions of the testing machine in GB/T17671-2021, JC/T960-2020, and JC/T724 standards.
YAW-300·10S Constant Load Cement Flexural and Compressive Testing Machine is an essential testing instrument for building materials,construction engineering, quality supervision, metrology testing, scientific research
institutions and other units.
The product complies with the specific provisions of the testing machine in GB/T17671-2021, JC/T960-2020, and JC/T724 standards.
Main technical parameters and specifications:
| Compressive strength test | Flexural strength test | ||
| Maximum test force (kN) | 300 | Maximum test force (kN) | 10 |
| Constant loading rate (kN/s) | 0.3~9.9 | Constant loading rate (kN/s) | 0.05 |
| Upper and lower platen spacing (mm) |
185 | Section side length (mm) | 40 |
| Pressure plate diameter (mm) | Φ120 | Span between supports (mm) | 100 |
| Piston maximum stroke (mm) | 90 | Piston maximum stroke (mm) | 45 |
| Indication relative error (accuracy) | ±0.5% | ||
| Indication repeatability relative error | 0.5% | ||
| Return to zero relative error | ±0.1% | ||
| The relative resolution of the force value display device of the test machine |
0.5% | ||
| Zero drift | ≤±0.1% | ||
| Servo motor power | Single phase 1500W | ||
| Power supply | 220V（±10%） | ||
| Dimensions (mm) | 1300×480×1340 | ||
| Weight(kg) | 500 | ||
■Features:
1. The whole machine adopts physical and chemical board countertop, and the frame
adopts static surface electroplating, which is easy to clean and beautiful.
2. The anti-bending part adopts electric oil cylinder, which has high precision, stable
control, accurate displacement and force value.
3. The sensor adopts the spoke sensor, which has high precision, stable speed and
reciprocation.
4. Servo motor system, silent throughout, low decibel, oil temperature is not easy to
rise, high efficiency and stability, voltage adopts single-phase 220V, strong versatility,
high efficiency and energy saving.
5. The protective cover is made of acrylic transparent material, which is clean and
beautiful, and the test process can be observed throughout the process.
6. The 40mmx40mm cement compression fixture is made of fully galvanized
material.
1. The whole machine adopts physical and chemical board countertop, and the frame
adopts static surface electroplating, which is easy to clean and beautiful.
2. The anti-bending part adopts electric oil cylinder, which has high precision, stable
control, accurate displacement and force value.
3. The sensor adopts the spoke sensor, which has high precision, stable speed and
reciprocation.
4. Servo motor system, silent throughout, low decibel, oil temperature is not easy to
rise, high efficiency and stability, voltage adopts single-phase 220V, strong versatility,
high efficiency and energy saving.
5. The protective cover is made of acrylic transparent material, which is clean and
beautiful, and the test process can be observed throughout the process.
6. The 40mmx40mm cement compression fixture is made of fully galvanized
material.
YAW-300·10S Constant Load Cement Flexural and Compressive Testing Machine is an essential testing instrument for building materials,construction engineering, quality supervision, metrology testing, scientific research
institutions and other units.
The product complies with the specific provisions of the testing machine in GB/T17671-2021, JC/T960-2020, and JC/T724 standards.
No PDF document available for this product at present
Leave a message
Please fill in information, we will get back to you within 24 hours.
![HZK-FA Series [0.1mg/0.01mg]](http://qiniu.digood-assets-fallback.work/457/image_1588234808_HZK-FA-Series-[0.1mg0.01mg]_-(6).jpg)
